Flat roof lanterns are modern, architectural skylights designed to sit on flat or low-pitched roofs. They allow natural light to flood into a space from above, creating a bright and airy atmosphere. With sleek frames and energy-efficient glazing, they’re perfect for extensions, orangeries, and open-plan living areas, adding both style and practicality.
The AWM Flat Roof Lantern is fitted with high efficiency energy rate glazing, keeping you nice and warm in the winter and suitably cool in the summer. Bring light in to dark spaces with compromising on energy efficiency. Great for use in stair wells, ground floor extensions etc.
Flat Roof Lantern
Flat Roof Lantern
Flat Roof Lantern
Flat Roof Lantern
Flat Roof Lantern
Our frameless flat roof lanterns are designed to deliver maximum natural light without any bulky framework interrupting the view. These sleek, minimalistic glass units are perfect for flat or low-pitch roofs, offering a clean, contemporary finish that enhances any space below. Whether you're upgrading a kitchen extension, dining area, or commercial setting, our roof lanterns provide a seamless glazing solution that looks just as good as it performs.
Each lantern is crafted from high-performance toughened glass, offering excellent thermal insulation and light transmission. The minimalist design allows more daylight to flood into your home or workspace, helping to create a brighter, more open atmosphere throughout the day. With no visible internal framework, the frameless design delivers uninterrupted sky views and a striking architectural feature from the inside and out.
These glass-only roof lanterns are ideal for modern builds or renovations looking to maintain clean lines and a contemporary aesthetic. The flush-fit design not only looks stylish but also helps reduce heat loss and prevent water pooling, making them as functional as they are beautiful.
Whether you’re an architect, builder, or homeowner, our frameless flat roof lanterns provide a premium glass solution to bring natural light deep into any property. Designed with quality, performance, and aesthetics in mind, they’re a standout choice for any flat roof project.
The installation pack includes a selection of universal frame and glazing packers, large 120mm self tapping frame screws and self tapping cill screws.
Kit Contains:
14x Frame Fixing Screws 112mm inc TORX Bit
5x Cills Screws 45mm
20x 2mm Packers
10x 3mm Packers
10x 4mm Packers
10x 5mm Packers
Please Note: We do not provide installation Foam / Sealant.
This item will be sent via tracked couriered
Safety glass should be fitted in all doors and other windows or glazed areas that are lower than 800mm from the floor level as indicated below
The first rule of thumb is to make sure you take accurate measurements in millimetres not inches. This gives you a finer level of accuracy and means there’s no room for error if we have to convert the measurement to metric.
So firstly step outside. You need to take height and width measurements for the brickwork opening. Bear in mind that the height measurements must be from underneath any existing removable windowsill. If your property is rendered, simply take off a little of the render and measure to the brickwork edge.
Remember the opening may not be exactly square so take a minimum of three measurements – top, middle and bottom, for the height and the same again for the width. This means your window manufacturer can get an accurate view of the exact size of the space the finished product will be fitted into. The final width and height measurement the manufacturer will use is the smallest one.
This sounds like odd advice but you need to take off 10mm from the final height and width measurements. This is to allow for a small fitting allowance around the new frame and means the fitter can make sure the new window frame sits squarely when it’s in place. Any gaps are then fitted with spacers and filled to keep the frame in just the right position.
This is a common error and certainly one to avoid. Ignore the old window frame – this is going because it is no longer suitable. Consider the fact that it may well have warped so the last thing you want to do is take measurements from it!
Make sure you check (and double-check) your measurements so you are 100% sure you have them correctly. This is important because we will not accept responsibility for incorrect measurements and you will still have to pay for a window that doesn’t fit. If you are unsure, consult a professional installer or builder and give yourself total peace of mind.
Taking all the above information in to account, when inputting your measurements we require you to provide us your overall brick-to-brick measurement minus the 10mm fitting tolerance. We will automatically include the cill in to the measurements you provide us – pending you require one that is!
If you struggle, or you would like us to contact you for piece of mind, once your order is placed just leave a note at the checkout asking for a call back!
